Results 1 to 6 of 6
  1. #1
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Feeders cables penetrating the service box

    I think this has been posted before but I will repost Are clamps required around the these penetrations into the back of the service box. They are the feeders for three interior panels. House was built in 06, 200 amp service.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Dec 2007
    Location
    Chico,Ca
    Posts
    454

    Default Re: Feeders cables penetrating the service box

    Yes they do need a proper connector, those anti-short bushing do not comply, unless you were in the Phoenix area they have a local amendment allowing that type of install.


  3. #3
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Feeders cables penetrating the service box

    They may have the same here, everyone I see is like this


  4. #4
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Feeders cables penetrating the service box

    Quote Originally Posted by Rollie Meyers View Post
    Yes they do need a proper connector, those anti-short bushing do not comply, unless you were in the Phoenix area they have a local amendment allowing that type of install.
    Quote Originally Posted by mathew stouffer View Post
    They may have the same here, everyone I see is like this
    Just because "everyone does it" ... I would not want to presume that it is approved or acceptable - I would write it up and let an electrical contractor provide written documentation from the local AHJ that they are okay with it and approve of that installation.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  5. #5
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Feeders cables penetrating the service box

    That is what I did. Thanks


  6. #6
    James Duffin's Avatar
    James Duffin Guest

    Default Re: Feeders cables penetrating the service box

    These clamps work fine in this application. You can get them up to 1 1/2" and can be installed without removing the wire.

    Attached Files Attached Files

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •