Results 1 to 4 of 4
  1. #1
    Dan Mack's Avatar
    Dan Mack Guest

    Default combination of insulations

    I was considering using 2"of formular 250 with r-19 fiberglass in my 2 x 8 stud walls. is this ok and what insulation should I put against my outside sheathing? A vapor barrier will be installed just inside my drywall wall.

    Similar Threads:
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Re: combination of insulations

    Depends on your location the construction of the wall.

    Here in Chicago I see many buildings where single wyeth concrete masonry unit + fiberglass + A poly vapor retarder + drywall is a recipe for disaster.

    OTOH, the same insulation / vapor retarder behind siding + a membrane such as Tyvek + Plywood or OSB sheathing works acceptably.

    For starters, you might want to take a look at Vapor Barriers and Wall Design by Joseph Lstiburek.

    Michael Thomas
    Paragon Property Services Inc., Chicago IL
    http://paragoninspects.com

  3. #3
    Dan Mack's Avatar
    Dan Mack Guest

    Default Re: combination of insulations

    Thanks for your feedback. I appreciate any feedback on this matter. I need good constructive criticism.


  4. #4
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,352

    Default Re: combination of insulations

    Personally, I would use 2x6 with R-19 and put the two inch foam on the outside of the OSB, followed by the house wrap on the exterior of the foam. You can get a nice tight seal around the house by taking your time with the foam.

    Jim Robinson
    New Mexico, USA

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •