Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2007
    Location
    Western Montana
    Posts
    261

    Default Cross-connection of water softener drain

    I see some things so often that I think are wrong, that occasionally I have to double-check myself. My understanding is that backwash drain lines from water softeners and other water treatment devices such as iron filters must drain into a floor drain or similar place, but if they drain into the DWV (domestic drain, waste, vent) system it needs to have an air gap and a p-trap. True? Is it sufficient to drain into a standing pipe on a drainpipe with a p-trap, or must it also have an air trap? Is it either an air gap, or a p-trap, or both?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Joe Nernberg's Avatar
    Joe Nernberg Guest

    Cool Re: Cross-connection of water softener drain

    You are correct. An air gap or an air break is necessary to prevent water contamination.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •