Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2009
    Location
    Raleigh
    Posts
    131

    Default hip and valley rafter prop brace or load bearing?

    With a hip roof, sometimes the vertical 2 x 4 braces under the hip/valley rafters are flimsy and other times appear substantial (several 2 x 4's nailed together and resting on a 2 x plate). Any ideas on how to tell if these are/should be providing support vs. a temporary brace used when constructing the roof framing? 2 x 4 in photo has been pushed off to the side by stored items and is not attached to the floor any longer.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance

  2. #2
    Join Date
    Nov 2011
    Location
    Oregon, USA
    Posts
    333

    Default Re: hip and valley rafter prop brace or load bearing?

    Most of them (all of them?) I've encountered over the years were temporary braces installed by framers as they were working the roof. Not required once all roof framing is in place, unless extremely long valley spans (with inadequate section modulus of member) may have required it.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •