Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2010
    Location
    Long Beach, CA
    Posts
    105

    Default Slate tile hanger system

    I've not seen this before (either in the field or on the web)....any info would be appreciated! The system appears to be a self-adhesive membrane/underlayment (perforated white texture on top of a black base), then a 2-inch metal band is installed atop the underlayment parallel with the ridge. The metal band has pairs of steel hooks that hold the edge of the slate. An thick vinyl-type interlayment is installed over the metal strap and extends near to the hook. The slate is simply laid upon slope and slid down against the hooks. Any tile can be removed by sliding it up and then pulling it above the hooks and then sliding it down and out. The blurry photo is a mess, but you can make out the basics of the system.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral

  2. #2
    Join Date
    Mar 2007
    Location
    Garland, TX
    Posts
    652

    Default Re: Slate tile hanger system

    similar to this Qwik Slate

    Last edited by BARRY ADAIR; 07-08-2012 at 07:41 AM.
    badair http://www.adairinspection.com Garland, TX 75042
    Commercial-Residential-Construction-EIFS-Stucco-ACMV-Infrared Thermography
    life is the random lottery of events followed by numerous narrow escapes...accept the good

  3. #3
    Join Date
    Feb 2010
    Location
    Long Beach, CA
    Posts
    105

    Default Re: Slate tile hanger system

    Thanks Barry...yeah, a variation of a theme; either one seems well engineered.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •