Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default strange addition to vent pipe

    This is a gas water heater single wall vent pipe, that someone stuck a piece of copper pipe on, for some unknown reason. I could not get the right angle to see down into it, but I stuck a screwdriver down and it appears to not penetrate the vent pipe.
    Any theories?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper
    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  2. #2
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: strange addition to vent pipe

    A spacer to separate the two pipes which has rotated out of position.


  3. #3
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: strange addition to vent pipe

    Quote Originally Posted by Raymond Wand View Post
    A spacer to separate the two pipes which has rotated out of position.
    Wow. I wasn't expecting a theory that actually sounded plausible. That never occurred to me.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  4. #4
    tom daley's Avatar
    tom daley Guest

    Default Re: strange addition to vent pipe

    1. The spacer possibility is a good call.
    However, given that the vent is single wall type-A - which should have three screws at each connection, how would the pipe roll out of position?

    Is that an adjustable length of vent pipe?


    2. There appears to be a crack in the metal just below the solder blob.


  5. #5
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: strange addition to vent pipe

    Quote Originally Posted by tom daley View Post
    1. The spacer possibility is a good call.
    However, given that the vent is single wall type-A - which should have three screws at each connection, how would the pipe roll out of position?

    Is that an adjustable length of vent pipe?


    2. There appears to be a crack in the metal just below the solder blob.
    Ha, ha, that's a good one. Three screws at each connection! Ha! Seriously, though, no, not screwed at connections, so could have rotated.

    Yep, I didn't know about the crack until I saw the photo. Couldn't see it with my own eyes, I had to reach back there with the camera and kind of point it back at myself.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  6. #6
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: strange addition to vent pipe

    Given the odd and hard to reach position, that might have been a make do handle the installer tacked on to wrestle the pipe into position.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •