Results 1 to 7 of 7

Thread: Boilers

  1. #1
    Join Date
    Dec 2010
    Location
    Illinois
    Posts
    64

    Default Boilers

    Hey guys. I do not see a lot of hot water heating here. However, everytime I do I get a little intimidated. I am wondering where I can get further info and/or training on them. Or steps any of you take to inspect them. Thanks.

    Similar Threads:
    OREP Insurance
    E.D.S
    Home Inspections
    Lic.#450.010534

  2. #2
    Join Date
    Jul 2008
    Location
    Chicago
    Posts
    263

  3. #3
    Join Date
    Feb 2008
    Location
    Chicago IL
    Posts
    2,048

    Default Re: Boilers

    Obviously lots of info you can find and read at various websites. As starting points:
    - Look at unit before firing if it isn't already running; this is to make sure it looks like it is functional and relatively safe instead of just turning it on and going Oh, __it!
    - once running check and document running temp and water pressure
    - check for auto flow valve and check valve
    - check for auto damper and operation if present, check flue pipe pitch and condition
    - when the unit is OFF look under the boiler to see how heavy the rust flakes are on the floor under the unit
    - check for any signs of dripping under the unit
    - check the burner tubes to see if they have been cleaned
    - check for drips or leaks along pipe runs
    - look for expansion tank
    - as you walk around the house feel the bottoms and tops of radiators for significant temp differences
    - check around radiators bleeders and valves for leaks
    There's lots more but that's it for now. This should get you going.

    www.aic-chicago.com
    773/844-4AIC
    "The Code is not a ceiling to reach but a floor to work up from"

  4. #4
    Join Date
    Dec 2008
    Location
    Maryland
    Posts
    2,809

    Default Re: Boilers

    Add to Markus list:
    - if oil fired burner, operation and function
    ---look for oil leaks
    ---flame appearance: to lean or to rich burn


  5. #5
    Join Date
    Jun 2010
    Location
    Vancouver
    Posts
    202

    Default Re: Boilers

    do NOT test or try the prv to see if it releases. this is something if you open it might not reseal and you will be liable for replacement.(pressure relief valve)


  6. #6
    Join Date
    Mar 2007
    Location
    Chicago
    Posts
    164

    Default Re: Boilers

    Hello Everybody,

    Two great books by Dan Holohan:

    Hydronic Radiant Heating
    Lost Art of Steam Heat

    You can find them at heating help.com


    Corey


  7. #7
    Join Date
    Dec 2010
    Location
    Illinois
    Posts
    64

    Default Re: Boilers

    Perfect guys. Thanks a lot.

    E.D.S
    Home Inspections
    Lic.#450.010534

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •