Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2009
    Location
    Medford, OR
    Posts
    1

    Default Interesting Main/Sub Panel Combo

    Was wanting to get some comments on this. I am already writing it up as "Needs evaluated by a Licensed Electrical Contractor" - However I was just wanting to satisfy my curiosity. Anyone seen this type of setup or know if it is legit.
    History - Home Built 1963
    Remodeled - WITH PERMITS - 1978
    Main Panel is inside GARAGE which is now a bedroom. ITE Panel
    New Main Panel is outside former Garage - Milbank
    Has 8 separate throws to disconnect all power to Home
    (Six is MAX - RIGHT - Like a Split Panel)
    100 amp Breaker serves old Main Panel
    Old ITE SPLIT Panel is inaccessible because they plastered over the front bezel.
    (Can't see anything Grounding, Bonding Etc. Nothing)

    THOUGHTS?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance
    Oregon Home Inspector OHCI#1520

  2. #2
    Join Date
    Aug 2008
    Location
    Maryland
    Posts
    1,970

    Default Re: Interesting Main/Sub Panel Combo

    I will wait until I can see this on a bigger monitor, but it looks like the main is the top right breaker.

    All answers based on unamended National Electrical codes.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •