Results 1 to 10 of 10
  1. #1
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default Interesting pipe fitting

    I had not seen one of these fittings before.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance

  2. #2
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: Interesting pipe fitting

    Quote Originally Posted by Jack Feldmann View Post
    I had not seen one of these fittings before.
    I have seen one of those before, once or twice. That is old school when plumbing was more that gluing and crimping stuff together. Back when Craftmanship that no one saw but the plumber who had pride in his work meant something.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  3. #3
    Join Date
    Aug 2011
    Location
    Bennett (Denver metro), Colorado
    Posts
    1,461

    Default Re: Interesting pipe fitting

    Pretty cool. Looks like age may have caught up to it.

    If you choose not to decide, you still have made a choice.

  4. #4
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default Re: Interesting pipe fitting

    Yep, pretty cool! You are right about getting to the end of it's life. There were lots of heavy rust blisters, copper/galvanized connections, and a few leaks too.


  5. #5
    Join Date
    Jan 2011
    Location
    Guelph,Ontario
    Posts
    173

    Default Re: Interesting pipe fitting

    Time to replace that mess.


  6. #6
    Join Date
    Dec 2007
    Location
    Osceola, AR
    Posts
    311

    Default Re: Interesting pipe fitting

    Crossover fitting? That is all I ever heard those called. Few and far between, only see these a handful of times each year...

    Alton Darty
    ATN Services, LLC
    www.arinspections.com

  7. #7
    Join Date
    Nov 2007
    Location
    Chicago
    Posts
    548

    Default Re: Interesting pipe fitting

    For some reason the picture is not showing for me.

    But here is something I bet most of you has not run into. This is a glass float ball for a ballcock.




  8. #8
    Join Date
    Dec 2007
    Location
    Chico,Ca
    Posts
    454

    Default Re: Interesting pipe fitting

    Quote Originally Posted by Ron Hasil View Post
    For some reason the picture is not showing for me.

    But here is something I bet most of you has not run into. This is a glass float ball for a ballcock.

    Only ones I remember are copper, thanks for sharing.


  9. #9
    Join Date
    Jul 2008
    Location
    Utah
    Posts
    390

    Default Re: Interesting pipe fitting

    Quote Originally Posted by Jack Feldmann View Post
    I had not seen one of these fittings before.
    That is very rare, and very cool. I agree with Jim Lutrall's comment, old school craftsmanship.


  10. #10
    Join Date
    Jul 2008
    Location
    Snowbird (this means I'm retired and migrate between locations), FL/MI
    Posts
    4,086

    Default Re: Interesting pipe fitting

    Quote Originally Posted by Alton Darty View Post
    Crossover fitting? That is all I ever heard those called. Few and far between, only see these a handful of times each year...
    Since you answered with a question mark, I'll confirm.

    simply "crossover" or as "crossover fitting", is correct; as is, and more commonly WAS "cross-over" fitting, coupling, bend, etc. or "cross over" fitting, etc. Not to be confused with a cross (four-way) or a cross or cross-over connection.

    Here is how the web-based version of the McGraw-Hill Dictionary of Architecture & Construction hosted by "answers.com" defines it for you:

    crossover
    2. A pipe fitting shapped like the letter "U" with the ends turned outward; used where one pipe crosses another in the same plane; also called a crossover fitting.

    clickable link for reference: Architecture and Construction: cross grain to crotchet from Answers.com

    An expansion U bend or double offset expansion U bend or double-offset U-bend can accomplish similar in slightly differing manner.



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •