Results 1 to 11 of 11

Thread: Scissor joist

  1. #1
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Question Scissor joist

    This home was built in 05. The back wall in the crawl space has a knee wall and then a sill for the joist. Does the sill need strapped to the knee wall top plate?
    The joist sit on the sill and has one toe nail in it. How are they suppose to be secured?
    Does the joist sitting on the top plate spanned between two studs need support under it. It is a two storey home?

    I appreciate any quick replies because I have to get this off first thing in the morning. Thanks in advance.

    Similar Threads:
    OREP Insurance
    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  2. #2
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Scissor joist

    Opps forgot the pictures

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  3. #3
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: Scissor joist

    Any chance the exterior sheathing is nailed off properly to tie everything together laterally?

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  4. #4
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Scissor joist

    I don't know the name of the sheathing but its those 4x8 panels that are about 1/8 thick. There water repellent. Don't remember what they are made of put are very flimsy. As far as being nailed correctly I doubt it but can't be sure.

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  5. #5
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Scissor joist

    Got a picture of the outside of the house?

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  6. #6
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Scissor joist

    Here they are.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  7. #7
    Martin lehman's Avatar
    Martin lehman Guest

    Default Re: Scissor joist

    I don't believe the joists need support directly beneath them, as there is a double top plate installed.
    As far as nailing goes, I am unsure for trusess, but conventional framing is 3 8d nails toe nailed to the top plate.


  8. #8
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,352

    Default Re: Scissor joist

    There would not be any strapping here in my area. It has been about four years since I did any framing, but I know we wouldn't have back then. It may have changed. Then again, we're definately not in a hurricane zone, or even a high wind zone.

    Jim Robinson
    New Mexico, USA

  9. #9
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Scissor joist

    Would a single nail be sufficient for fastening?

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  10. #10
    Martin lehman's Avatar
    Martin lehman Guest

    Default Re: Scissor joist

    You sould probably try and look up the manu. specs.
    I'll bet they require one on each side of the flange, for a total of two.


  11. #11
    Join Date
    Jul 2008
    Location
    Utah
    Posts
    390

    Default Re: Scissor joist

    If there are two stories above the wall it should be framed with 2x6 studs or 2x4 at 12" O.C.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •