Results 1 to 11 of 11
  1. #1
    RobertSmith's Avatar
    RobertSmith Guest

    Default Sink drain line configuration

    Last edited by RobertSmith; 12-20-2007 at 10:05 AM.
    Crawl Space Creeper

  2. #2
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Sink drain line configuration

    I'm having a little trouble seeing it as well!

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  3. #3
    Join Date
    Mar 2007
    Location
    Santa Rosa, CA
    Posts
    3,154

    Default Re: Sink drain line configuration

    Robert,

    Not sure if you are kidding, but there is no pic. Hard to comment on something that we can't see.

    Department of Redundancy Department
    Supreme Emperor of Hyperbole
    http://www.FullCircleInspect.com/

  4. #4
    James Duffin's Avatar
    James Duffin Guest

    Default Re: Sink drain line configuration

    Besides a possible back grade issue it looks OK to me.


  5. #5
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Sink drain line configuration

    Which way does it drain to? To the left (behind the trap) or to the right?

    What is to the right and what is to the left (behind the trap)?

    I 'think' it drains to the left and behind, into the back wall, either way, a wye should be installed instead of a tee.

    I see several problems with those fittings, starting with the wall bend coming up out of the 'P' trap ... there is no depth in the fitting it is into for the slip ring to seal well and have much grip on that piece, which could allow it to fall out, or at least leak.

    Is that a bathroom with a pop-up drain? Looks too small to be anything other than a lavatory 1-1/4" drain.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Sink drain line configuration

    Quote Originally Posted by RobertSmith View Post
    The sink drains to the right to a hall bathroom sink drain.
    What is behind it? Hope it is not a clothes washer.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  7. #7
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Sink drain line configuration

    Quote Originally Posted by RobertSmith View Post
    So Scott,

    you agree then the drain line configuration is improper, then?
    Well now that I can see a picture, Yes it is screwed up. It can be corrected, but it will take a plumber who has some knowledge and ability and not the homeowner.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  8. #8
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Sink drain line configuration

    Quote Originally Posted by James Duffin View Post
    Besides a possible back grade issue it looks OK to me.
    What is a "Back grade issue"? I have never heard of this.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  9. #9
    James Duffin's Avatar
    James Duffin Guest

    Default Re: Sink drain line configuration

    It's the opposite of forward grade...


  10. #10
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Sink drain line configuration

    Quote Originally Posted by Scott Patterson View Post
    What is a "Back grade issue"? I have never heard of this.
    Scott,

    I think he means it is reverse sloped.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  11. #11
    Joshua Hardesty's Avatar
    Joshua Hardesty Guest

    Default Re: Sink drain line configuration

    Woah! What the crap?

    I'm having a hard time telling exactly what I'm looking at.


    What's coming out of the wall behind the trap?

    How does it drain into the hall bath's drain?

    I'm guessing, and this is based on very limited data, that the trap at one point drained into the back wall. That *appears* to be a trap adapter coming out of it. Also, note the crud ring on the wall arm of the trap where a ferrule used to be. I can't guess to the motivation of moving the drain though.



    EDIT: Also, that tee, and the pipe with the short bend coming out of (what should be) the bottom of it, looks like the kind you'd use to join two sink drains together before sending it into a trap. If it is, that tee has baffles in it meant direct water downward and prevent it from going across the tee.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •