Results 1 to 4 of 4
  1. #1
    RobertSmith's Avatar
    RobertSmith Guest

    Default Lintel installation

    Last edited by RobertSmith; 12-20-2007 at 09:58 AM.
    Inspection Referral

  2. #2
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Lintel installation

    Heck if the home is 30 years old and it had not done anything, I would not even worry about. Would not even make my report.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  3. #3
    Kevin Barre's Avatar
    Kevin Barre Guest

    Default Re: Lintel installation

    I agree w/ Scott. Generally, there isn't a lintel even used with arches anyway as they are pretty good at supporting themselves. That said, the flatter they are, the less effective they are at that job. But in this case, the brick load above is minimal. If there's been no movement in 30 years, I don't expect much if anything now. Barring some outward force acting on it that's not present now, of course.


  4. #4

    Default Re: Lintel installation

    Arches will support themselves after the mortar has set up. Until then supports (such as wooden forms cut to the shape of the arch) are used, or should be.
    With the one pictured where a lintel is used I suspect it did not have a stiffleg support in place midway & sagged in the middle, causing the ends to bow up.
    Wider door & window openings will also sag if not supported until the mortar has set.

    Clarksville Home Inspection
    JW Goad
    TN License #307 | KY License #2402

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •