Results 1 to 2 of 2
Thread: New Member
-
04-07-2018, 08:07 AM #1
New Member
Hello,
Actually I am an electrical contractor. I keep getting asked to interpret inspection reports and either support them, repair things noted or explain why they are not a problem.
I have been getting a lot more inquirers about assisting with commercial inspection due to the increased safety risk involved in the larger equipment.
I found this site doing research looking for different code sections to support a safety issue.
-
04-07-2018, 08:28 AM #2
Thanks for posting here and welcome to InspectionNews!
You will find a ton of information here but don't forget about the Member Benefits too.
Some save you time, others save you money and some do both!
Make sure you view the list of Member Benefits at: http://www.InspectionNews.net/home_i...MemberBenefits
View The List Of InspectionNews Member Benefits!
-----------------
Sincerely,
Brian Hannigan
InspectionNews.net / InspectionReferral.com
Helping Inspectors $ucceed Since 1997TM
Facebook: https://www.facebook.com/InspectionNews
Twitter: @InspectionNews
Bookmarks