Results 1 to 5 of 5
  1. #1
    Jeff Eastman's Avatar
    Jeff Eastman Guest

    Default rust on gas meter

    ..........

    Similar Threads:
    Last edited by Jeff Eastman; 12-19-2007 at 03:31 PM.
    OREP Insurance

  2. #2
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: rust on gas meter

    From what I can see in the photo, I wouldn't be that concerned about rust - but what is that flex line going into the ground? If it's CSST, why isn't the outer covering on it at the top?

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  3. #3
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: rust on gas meter

    John,

    Can not tell for sure from the photo, but that does not look like flex pipe going into the ground to me.

    It looks like some kind of wrap maybe at the top or rigid to flex maybe but the pipe going into the ground looks to me to be rigid.


  4. #4
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: rust on gas meter

    That is the supply line from the gas utility. I don't think it is CSST. That "rib" looking at the top is most likely a covering on the line and the location wire that is wrapped around the gas lines so that the line can be located.

    Rust like that on a meter would not even make my report.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  5. #5
    Join Date
    Mar 2007
    Location
    Muncie, Indiana
    Posts
    79

    Wink Re: rust on gas meter

    I don't comment on any surface rust seen. I will comment on any meter that the base is buried in the ground or mulch for possible corrosion issues. See this a lot, mostly mulch.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •