Results 1 to 9 of 9
  1. #1
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default 2020 Changes to the NEC

    https://ewh.ieee.org/r3/nashville/ev...ges%20R1.3.pdf

    (Look at the GFCI changes, among others, and, no, I have not updated my GFCI page past the 2014 NEC, I had heard that Mike Holt was maybe going do to update the GFCI and AFCI pages 'when he gets time', however, he was busy working on the 2020 Changes to the NEC at that time, and is now busy teaching those 2020 changes to the NEC.

    If some NEC code person would like to update the GFCI and AFCI pages for the 2017, and now the 2020, NEC, I will gladly send them the Word .doc files to use as their updating starting point.)

    Last edited by Jerry Peck; 07-22-2020 at 04:31 PM. Reason: added last part about GFCI and AFCI pages updating
    OREP Insurance
    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  2. #2
    Join Date
    Mar 2013
    Location
    Md and or PA
    Posts
    137

    Default Re: 2020 Changes to the NEC

    Jerry- Send me the word file and I will look into updating in my spare time


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: 2020 Changes to the NEC

    Jack,

    Files are traveling through hyperspace, possibly at "Warpspeed" or maybe even at "Lightspeed".

    Thank you,

    Jerry

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Aug 2008
    Location
    Maryland
    Posts
    1,970

    Default Re: 2020 Changes to the NEC

    All answers based on unamended National Electrical codes.

  5. #5
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,352

    Default Re: 2020 Changes to the NEC

    So dryer 240 volt is now on the GFCI when the new code is adopted. I wonder if that will be exempted in many states or left along. At some point in the future, I see a main breaker just providing GFCI and AFCI to every circuit in the house.

    Jim Robinson
    New Mexico, USA

  6. #6
    Join Date
    Mar 2009
    Location
    Colorado Front Range
    Posts
    684

    Default Re: 2020 Changes to the NEC

    Quote Originally Posted by Jim Robinson View Post
    At some point in the future, I see a main breaker just providing GFCI and AFCI to every circuit in the house.
    That would be great if you didn't mind stumbling around in the dark trying to figure out why it tripped.

    Occam's eraser: The philosophical principle that even the simplest solution is bound to have something wrong with it.

  7. #7
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: 2020 Changes to the NEC

    Quote Originally Posted by Jim Robinson View Post
    At some point in the future, I see a main breaker just providing GFCI and AFCI to every circuit in the house.
    Quote Originally Posted by Bill Kriegh View Post
    That would be great if you didn't mind stumbling around in the dark trying to figure out why it tripped.
    And limit all leakage to ground for the entire house to 5 ma (referring to the GFCI protection part).

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  8. #8
    Join Date
    Mar 2013
    Location
    Md and or PA
    Posts
    137

    Default Re: 2020 Changes to the NEC

    I know I said would work on the updating of the GFCI / AFCI changes..
    As of today I have yet to find time to even look into starting this.
    If anyone out there would like to take on this - speak up


  9. #9
    Join Date
    Dec 2007
    Location
    Chico,Ca
    Posts
    454

    Default Re: 2020 Changes to the NEC

    Massachusetts, adopted the 2020 at the first of the year, a few states have since adopted it, CO,SD,TX,WA, & WY, at this time the 2020 is irrelevant in the rest of the country until it's adopted, but when it is, BIG changes are in store.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •