Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2020
    Location
    texas
    Posts
    8

    Default Skylights , the dreaded topic

    is it a requirement for the corner joints to be soldered and/or sealed?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,352

    Default Re: Skylights , the dreaded topic

    Not that I am aware of. Certainly good practice to seal them but I don't think I have ever seen a field built flashing soldered. The sealant would tend to be under the metal so mostly would not be visible.

    Jim Robinson
    New Mexico, USA

  3. #3
    Join Date
    Feb 2008
    Location
    Chicago IL
    Posts
    2,048

    Default Re: Skylights , the dreaded topic

    That open corner should be clipped in under the other piece so that it keeps the corner closed. That's why it has that U hook type end.
    Never seen anybody solder the corners. That flashing is mostly about water run off not so much sealing. The sealing is done by the stuff underneath.

    www.aic-chicago.com
    773/844-4AIC
    "The Code is not a ceiling to reach but a floor to work up from"

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •