Results 1 to 1 of 1
  1. #1
    Join Date
    Aug 2020
    Location
    texas
    Posts
    8

    Default chimney flashing

    screw fasteners were installed on top of the step/counter flashing (you will have to zoom in). Is this acceptable in installation requirements, I can't find any place where it is acceptable but roofer is whining to replace, he wants to just seal the fastener.

    Also, step flashing wasn't used along one sidewall of the chimney, is this really a problem (rather then using step flashing)

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •