Results 1 to 2 of 2

Thread: Hot AFCI'S?

  1. #1
    Michael Sierra's Avatar
    Michael Sierra Guest

    Question Hot AFCI'S?

    I was at my in law's newly completed house and was checking out the basement. it is constructed of superior walls and wanted to see the profile with my if camera.

    I opened the electrical panel and noticed that all the AFCI had a higher temp profile than the than a standard breaker. The units were warm to the t touch but showed no signs of scorching on the underside when I pulled them. My amp probe showed that they were pulling 3 amps.

    Is this a normal situation.

    I am in the process of researching the situation but wondered if any one had information.

    Similar Threads:
    Inspection Referral

  2. #2
    Join Date
    Oct 2003
    Location
    Rockwall Texas
    Posts
    4,521

    Default Re: Hot AFCI'S?

    AFCI's are typcial hot to the touch. Nature of the beast. Not an issue.

    Some have stated that the AFCI's should not be more than 3 stacked, but all the Master Electricians I've talked to said thats not an issue.

    rick


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •