Results 1 to 9 of 9
  1. #1
    Joe Griffin's Avatar
    Joe Griffin Guest

    Default Anyone seen this before?

    I found this today in a basement. If you look closely, someone put a kerf cut in the lower chord section of the joist. Then, a strain gauge or deflection monitor of some type was installed over the kerf. It appeared to be wired to the alarm system, but I couldn't see the end termination, so that is an assumption on my part.

    I have never seen this, but would someone want to elaborate if they have? As to why, and exactly what the device is monitoring, deflection, settling, vibration, etc?

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance

  2. #2
    David Banks's Avatar
    David Banks Guest

    Default Re: Anyone seen this before?

    Someone has way to much time on their hands


  3. #3
    Michael Larson's Avatar
    Michael Larson Guest

    Default Re: Anyone seen this before?

    Would have cheaper to just sister or nail plate the 2 X.


  4. #4
    Join Date
    Mar 2007
    Location
    Orlando, FL
    Posts
    1,592

    Default Re: Anyone seen this before?

    It's a floor stress sensor, hooked to the alarm system.

    Step on the floor, sensor picks up the movement.

    Example here.


  5. #5
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: Anyone seen this before?

    I sure would hate to see someone try to install that on an I-joist.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  6. #6
    Joe Griffin's Avatar
    Joe Griffin Guest

    Default Re: Anyone seen this before?

    Dom, that was my thought initially, but you confirmed it with the web link. I guess that is the reason for the kerf cut as well, to allow it to flex slightly, therefore setting off the alarm. I should put one of these just under and in front of my refridgerator door! Nah, that wouldn't work, it would be going off constantly with my 18 year old son. Thanks for the tip.
    PS had you actually had experience with this or did you google?


  7. #7
    Join Date
    Mar 2007
    Location
    Orlando, FL
    Posts
    1,592

    Default Re: Anyone seen this before?

    Joe,

    I remembered some odd-ball stuff from a huge new construction gig awhile back. The alarm system was quite complicated and I read some of the specs. on the parts and features. These devices were installed on the second floor framing, and on the staircase, so they were visible. Paranoid buyer, as they had different types of sensors almost everywhere in the house.

    Dom.


  8. #8
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Anyone seen this before?

    My guess is that the saw cut was there, and someone said 'Instead of replacing it or repairing it, let's just see if it sets off a stress gage - I've got one in my garage we can try it with'.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  9. #9
    Join Date
    Mar 2007
    Location
    Healdsburg, CA
    Posts
    1,741

    Default Re: Anyone seen this before?

    Perhaps it’s the home of Matilda and Babar?

    Jerry McCarthy
    Building Code/ Construction Consultant

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •