Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2007
    Location
    Ft. Myers, FL
    Posts
    363

    Default Cut deck joists, and flashing question.

    On inspection today, on one deck joist, about 12' long there were 2 notched sections, replaced with 2X4. I assume due to rot, but the rest of the joists were fine. In my opinion this 2x10, is now essentially a 2x6. Any thoughts.

    Second question, a porch roof added to side of house. There is just caulk, no visable flashing. This is a side wall that used to be open to the weather, but it should still be flashed to prevent moisture problems when the caulk fails, correct??

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance
    Paul Kondzich
    Ft. Myers, FL.

  2. #2
    Join Date
    Mar 2007
    Location
    Charlotte NC Licensed in NC and SC
    Posts
    597

    Default Re: Cut deck joists, and flashing question.

    Yes, its now just about a 2x6, maybe a little better but needs a scab on both sides. The 2x4 present is nothing but a filler. Both of the scabs need to be about 6-8 feet long and could be 2x8 or 2x10 properly nailed (lots of nails).

    The siding should have at least a one inch gap above the shingles with flashing visible.


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Cut deck joists, and flashing question.

    What they did was over notch the joists and / or notch the joists where they are not allowed to.

    As Bruce said, now those joists need proper repairs.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    David Banks's Avatar
    David Banks Guest

    Default Re: Cut deck joists, and flashing question.

    This confirms what Jerry said about notch.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Last edited by David Banks; 03-23-2008 at 05:42 AM. Reason: missing word

  5. #5
    Join Date
    Mar 2007
    Location
    Ft. Myers, FL
    Posts
    363

    Default Re: Cut deck joists, and flashing question.

    Thanks guys, any thoughts on the flashing issue?

    Paul Kondzich
    Ft. Myers, FL.

  6. #6
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Cut deck joists, and flashing question.

    Quote Originally Posted by Bruce King View Post

    The siding should have at least a one inch gap above the shingles with flashing visible.
    .

    Quote Originally Posted by Paul Kondzich View Post
    Thanks guys, any thoughts on the flashing issue?
    .

    Paul,

    Bruce answered your question correctly.

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •