Results 1 to 19 of 19
  1. #1
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Name of person at *Quote*?

    Brian,

    Just out of curiosity, when quoting someone their name does not appear next to the word *Quote* any more.

    Did something change? Their name used to be there.

    No big deal, just that it was nice to see who made the quote especially in long treads when the quote was 8 or 9 posts above.

    Similar Threads:
    OREP Insurance

  2. #2
    Richard Moore's Avatar
    Richard Moore Guest

    Default Re: Name of person at *Quote*?

    Quote Originally Posted by Tim Moreira View Post
    Brian,

    Just out of curiosity, when quoting someone their name does not appear next to the word *Quote* any more.

    Did something change? Their name used to be there.

    No big deal, just that it was nice to see who made the quote especially in long treads when the quote was 8 or 9 posts above.

    ?????


  3. #3
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    Wow,

    That doesn't show up on my computer any more.

    All I see when I do a copy/paste of some one else's quote and then click on the quote icon in the tool bar is:

    Quote then the quote.

    It does not say: Originally Posted by XXXXXXXX

    I do not see the name of the person like I see in yours Richard.

    I used too, but not anymore.

    Thought something had changed.

    Darn computers

    ???

    Thanks.


  4. #4
    Richard Moore's Avatar
    Richard Moore Guest

    Default Re: Name of person at *Quote*?

    All I see when I do a copy/paste of some one else's quote and then click on the quote icon in the tool bar is:

    Quote then the quote.

    It does not say: Originally Posted by XXXXXXXX
    Copied and pasted.

    Tim, I believe you only get the "posted by" if you click on the "quote" button at the bottom of that particular post. You don't get it the way you descibed.


  5. #5
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    Quote Originally Posted by Richard Moore View Post
    Copied and pasted.

    Tim, I believe you only get the "posted by" if you click on the "quote" button at the bottom of that particular post. You don't get it the way you descibed.

    ...test


  6. #6
    Richard Moore's Avatar
    Richard Moore Guest

    Default Re: Name of person at *Quote*?

    There ya go.


  7. #7
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    Well your right Richard.

    Except that in previous posts, I did a copy/paste and the person's name showed up.

    Weird.

    ?????

    Thanks


  8. #8
    Richard Moore's Avatar
    Richard Moore Guest

    Default Re: Name of person at *Quote*?

    Quote Originally Posted by Tim Moreira View Post
    Well your right Richard.

    Except that in previous posts, I did a copy/paste and the person's name showed up.

    Weird.

    ?????

    Thanks
    I don't remember seeing the multi-quote button (whatever that does) when the board originally changed, so something may have changed. And then, it may be our new buddy Megan screwing around!

    We are now beyond my level of techinal help...BRIAN!!!!


  9. #9
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    Beats me, but I think it is Megan screwing around

    Thanks


  10. #10
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,510

    Thumbs up Re: Name of person at *Quote*?

    Quote Originally Posted by Tim Moreira View Post
    Wow,

    That doesn't show up on my computer any more.

    All I see when I do a copy/paste of ...
    Hi Tim, That may be the issue. When you do a quote there is no "Copy/Paste" involved.

    If you want to quote one post just click on "Quote" on that post.

    If you would like to quote many posts just click on "Quote+" (it will turn orange) on all the posts you want to quote and then click Reply.

    If you click "Quote+" to select that post you can click it again to un-select it.

    More info: When you see a quote in a post there will be an arrow next to the name.

    Example:
    "Originally Posted by Tim Moreira "

    Click the arrow and it will take you to the post that is being quoted. Very helpful if only a partial quote is used.

    View The List Of InspectionNews Member Benefits!

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  11. #11
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    How do you do a partial quote with the name of the person at the top.

    I could swear that when this new board opened all I did was a copy paste of the person's partial quote and it showed the persons name too.

    When I click on quote at the bottom right of the page it quotes the whole quote.

    Do I then go in and edit the stuff out I don't need? If so, that's fine with me if that's the way it is done?


  12. #12
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    test, test, test



    Quote Originally Posted by Brian Hannigan View Post
    Hi Tim, That may be the issue. When you do a quote there is no "Copy/Paste" involved.

    If you want to quote one post just click on "Quote" on that post.

    If you would like to quote many posts just click on "Quote+" (it will turn orange) on all the posts you want to quote and then click Reply.



  13. #13
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    OK, I guess that's what I need to do.

    Quote the whole thing and then edit out what I don't want.

    Just wondering if there was an easier step to take.

    Thanks all,


  14. #14
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,510

    Default Re: Name of person at *Quote*?

    Tim, do you need me or are you just talking to yourself

    Yes, you have it right. Click the quote button and then edit/delete anything in that quote that doesn't apply.

    View The List Of InspectionNews Member Benefits!

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  15. #15
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    Thanks,

    I was talking to myself. Less arguments that way


  16. #16
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default Re: Name of person at *Quote*?

    "Inspection News tech support. How can I help you?"

    "Yes, I was trying to post something on the new message board and I got a message instructing me to "Press any key to continue"."

    "OK. So was there a problem?"

    "Yes. I can't find the "Any" key."



    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

  17. #17
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    Ha, ha,

    Question: What time is the midnight buffet?


  18. #18
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Name of person at *Quote*?

    Quote Originally Posted by Tim Moreira View Post
    Ha, ha,

    Question: What time is the midnight buffet?
    I didn't know Jimmy was going to be there.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  19. #19
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: Name of person at *Quote*?

    Jerry,

    I never expected you to be a "Parrot Head" too.




Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •