Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Stucco meets stone

    Stone to stucco, with a combination of horizontal and vertical junctions.

    Is there any way to do this right?

    If so, how?

    Any link to installation instruction / diagram?

    - Thanks

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper
    Michael Thomas
    Paragon Property Services Inc., Chicago IL
    http://paragoninspects.com

  2. #2
    Join Date
    Jul 2007
    Location
    Phoenix, AZ
    Posts
    182

    Default Re: Stucco meets stone

    Can't tell the system thickness from the photo, (it would be nice to hold the end of a tape measure up to the stem when taking pictures like this) but it seems from the other pics that the stucco was installed after the stone work. Ideally there should be a j-metal stucco stop where all stucco meets dissimilar materials, in this case, because of the in & out of the stone, the stucco sub or the designer decided not to do it.
    If all the WB's and flashings are in place, (hard to tell w/o destructive testing) it should be ok, unless there is other evidence of moisture intrusion on the interior, you might suggest it as an area to watch for future problems.

    I'm a dyslexic agnostic-Don't believe there is a dog...

  3. #3
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Re: Stucco meets stone

    Thanks. No evidence of water damage at the interior founds visually, by IR or with a meter - there a number of problems with that stucco and the roof above it, and I was prepared to find some.

    One of my concerns is that based on detailing elsewhere, this appears to manufactured stone, and if so may be subject to problems from even "small" areas of moisture intrusion:

    http://www.impressionsinstone.biz/II...tPractices.pdf

    so I'm aways a little skittish when I see it, and in this case none of the installation guides I can find discuss detailing at that sort of irregular junction.

    Michael Thomas
    Paragon Property Services Inc., Chicago IL
    http://paragoninspects.com

  4. #4
    Join Date
    Jul 2007
    Location
    Phoenix, AZ
    Posts
    182

    Default Re: Stucco meets stone

    Great article-Everyone should read...Thanks!
    Manufacturers' detailing can be hit and miss depending on the product. I would suggest reading what is posted at the onecoat manufacturers association, I believe their website is ocma.com, but if you google it, you should come across it pretty fast.

    I'm a dyslexic agnostic-Don't believe there is a dog...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •