Results 1 to 4 of 4
  1. #1
    Jeff Eastman's Avatar
    Jeff Eastman Guest

    Default Clearances for Panel

    Last edited by Jeff Eastman; 12-19-2007 at 03:55 PM.
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Clearances for Panel

    Huh?

    You mean like in a hallway? Where could be opposite each other?

    Or do you mean for the side of a window on the same wall? There are no requirements for that.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Clearances for Panel

    No problems there. Not for the panel being there.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Clearances for Panel

    Quote Originally Posted by Jeff Eastman View Post
    thanks , Jerry....now if it was an SEC - - OUCH!
    If it were the overhead service drop, very much a problem.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •