Results 1 to 3 of 3

Thread: Feeling Pinched

  1. #1
    John Achin's Avatar
    John Achin Guest

    Default Feeling Pinched

    The close up of the wiring is on the right side of the Fujitsu unit. The plastic cover on the right is bowed out and stressed as you can see on the screw below the wires. The wires are pinched. This seems like a problem to me, but there seems to be no other way to run the wires into the grommets. What do you guys think?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Feeling Pinched

    Quote Originally Posted by John Achin View Post
    What do you guys think?
    Not having a not-so-close-up photo of that area ... I am thinking that the plastic cover was left off like that so the inspector could see that bushings/strain reliefs were used, and then no one moved it back where it should be - where the other screw in that photo is.

    Don't forget to write up that disconnect behind the condenser unit - the required working space in front of the disconnect is not there.

    Because of that second disconnect, it looks like they had originally wired for two of them.

    Hopefully, that copper pipe with the turned down elbow *is not* a T&P discharge from a water heater.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    John Achin's Avatar
    John Achin Guest

    Default Re: Feeling Pinched

    Thank's for the input Jerry.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •