Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2010
    Location
    Comer, GA
    Posts
    16

    Default Site built beam drop at midspan

    A contractor hired to begin improvements on a recent purchase of a 45 yr old home called me after he noticed front and back walls standing 2+ inches out from vertical.
    P4180318.JPG
    He removed covering from the big center beam spanning 28 ft to find evidence of concealment by prior owner.
    P4180303.JPG
    Beam is stacked spruce 2x4 that deflects 2+ inches at center. Disguise artist wrapped bottom edge with spruce 2x that hides deflection at bottom edge.

    P4180338.JPG


    An engineer is supposed to be following my visit.

    Anyone see this much effort at flimflam before?

    Similar Threads:
    2018 ASHI InspectionWorld

  2. #2
    Join Date
    Jul 2014
    Location
    AZ
    Posts
    14

    Default Re: Site built beam drop at midspan

    Wow!! Would like to hear more on this house.


  3. #3
    Join Date
    Aug 2011
    Location
    Hercules, CA
    Posts
    158

    Default Re: Site built beam drop at midspan

    Looks like a glulam beam without the glue! It's just a problem of shear flow. As it didn't fall down I would say your engineer could probably make it work as a beam by propping it up to take out the deflection, nailing or screwing the layers together and adding plywood on both sides.

    Thom Huggett, PE, SE, CBO

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •