Results 1 to 3 of 3
Thread: Flir T420 overlay question
-
10-28-2020, 01:51 PM #1
Flir T420 overlay question
Hi guys, many years ago I bought this camera from UI while taking level 1 training, roof-scan training and equine training, thinking I was going to make bucket loads of money (haha). So when that didn't happen, I decided to pull it out for a really quick scan during my regular home inspections, more so to cover my own ass. I've only charged an extra fee a handful of times. My question is how do I get rid of the [FOV 45 deg] overlay shown at bottom left of my image ?
I've read a pdf instructional manual which mentions FOV but not how to turn it off from displaying. I contacted Flir tech support but they come back with programming my button to hide graphics, which works but it turns off all graphics. I still want the temp-scale to remain on screen.
Anyone have any experience with this ?
Similar Threads:
-
10-28-2020, 04:47 PM #2
Re: Flir T420 overlay question
t440-bx owner
my inside guru calls it flir inconvience feature
whenever lenes are changed from the original calibration by consumers
flir wants to collect a recalibration fee
unless you are using for sensitive qualitative purposes, i've had intermittent sucess with uninstall lens & reinstall lens
seems better & has lasted longer while the imager is on...ymmv
badair http://www.adairinspection.com Garland, TX 75042 TREC # 4563
Commercial-Residential-Construction-EIFS-Infrared Thermography
life is the random lottery of events followed by numerous narrow escapes
-
11-25-2020, 08:47 AM #3
Re: Flir T420 overlay question
I have also the same question about it. My office had this camera too.
Bookmarks