Results 1 to 3 of 3
  1. 05-02-2007, 05:13 PM #1
    Jeff Eastman's Avatar
    Jeff Eastman Guest

    Default Chimney questions

    ............

    Similar Threads:
    Last edited by Jeff Eastman; 12-19-2007 at 03:58 PM.
    OREP Insurance
    Reply With Quote Reply With Quote
  2. 05-02-2007, 06:21 PM #2
    Jerry Peck's Avatar
    Jerry Peck
    Jerry Peck is offline Member
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Chimney questions

    See attached for the 'preferred' method.

    Attached Files Attached Files
    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com
    Reply With Quote Reply With Quote
  3. 05-02-2007, 06:38 PM #3
    Randy Brooks's Avatar
    Randy Brooks Guest

    Default Re: Chimney questions

    Jeff,

    In the grand scheme of things, this is not a huge issue. Yes, brick on a 45 degree angle would be a plus, but water ultimately will enter the structure at the shoulder location eventually. Remember that the chimney crown is commonly found made of mortar as well. There are many products available in the chimney industry that will seal these mortar crowns and or shoulders and address any water sealing issues this structure may have.

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules