Results 1 to 5 of 5
-
05-16-2008, 08:02 AM #1
Cables entering distribution panels
What are the requirements regarding number of cables entering a panel (per entrance). Five cables were jammed in this single entrance.
Similar Threads:
-
05-16-2008, 08:54 AM #2
Re: Cables entering distribution panels
Matthew
Check out this thread
http://www.inspectionnews.net/home_i...revisited.html
Critical Home Inspection Services
www.Home2Spec.com
-
05-16-2008, 01:27 PM #3
Re: Cables entering distribution panels
Victor,
Thanks. Have a good weekend.
-
05-16-2008, 03:19 PM #4
Re: Cables entering distribution panels
Matthew,
You might also find that the clamps are designed for 1-2 cables.
Department of Redundancy Department
Supreme Emperor of Hyperbole
http://www.FullCircleInspect.com/
-
05-16-2008, 06:10 PM #5
Re: Cables entering distribution panels
The actual requirements are part of the listing, and printed on the box the connectors came in.
The pattern seems to be that the connectors are listed to hold either one round, or two flat, cables.
Bookmarks