Results 1 to 6 of 6
  1. #1
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Toilet shut off valve

    Any thoughts on why these were installed. Several toilets in the home were like this.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Apr 2007
    Location
    state of jefferson
    Posts
    522

    Default Re: Toilet shut off valve

    future hand held bidet?


  3. #3
    Join Date
    Mar 2007
    Location
    Atlanta, Georgia
    Posts
    1,088

    Default Re: Toilet shut off valve

    It has been posted here before where someone added a kitchen sink sprayer or hand held shower head at this location for a makeshift bidet.

    "The Code is not a peak to reach but a foundation to build from."

  4. #4
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Toilet shut off valve

    No telling why, other than what Bruce posted. When they correctly secure the PEX and the valve you might recommend that they remove it...

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  5. #5
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: Toilet shut off valve

    Kitchen sprayer connection for cheap bidet. I have seen a few in various ethnicity / religion homes. I always recommend removing due to cross contamination issues.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  6. #6
    Join Date
    Jul 2008
    Location
    Snowbird (this means I'm retired and migrate between locations), FL/MI
    Posts
    4,086

    Default Re: Toilet shut off valve

    What you have now are dead-ends (health issue/plumbing violation) which are open to contamination.

    Poor man's bed pan/potty-chair/medical comode/diaper rinser/colostomy bag washer. The plumbing codes address the proper method of installing same, this is not one of them.

    Other possiblity wrong way to install an "insty-hot" feed to temper supply water (warm it) to prevent condensation on the toilet tank.

    Open port no vac breaker, no check, syphon, and dead end to valve is no good - especially in such a contamination prone zone below flood rim of toilet bowl!

    Unsupported/unprotected pex through floor exposed no protection from damage - plastic disk/flange on floor NG either, S/B metal.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •